Plogger Photo Feed: Shearerfab Manifold Album

Shearer exhaust manifold 6 - 8.18.2008

Mon, 18 Aug 2008 08:56:17 +0900

Shearer exhaust manifold 6 - 8.18.2008

No. 4 runner welded up from 7 pieces... With a GT42, the compressor cover hits the WG flange and needs to be ground...

Shearer exhaust manifold 5 - 8.18.2008

Mon, 18 Aug 2008 08:56:17 +0900

Shearer exhaust manifold 5 - 8.18.2008

The contruction is sound but damn is it ugly. Looks like making it fit in the tight DSM compartment was the priority. The quirk of having a DSM, there's not much to choose from.

Shearer exhaust manifold 4 - 8.18.2008

Mon, 18 Aug 2008 08:56:17 +0900

Shearer exhaust manifold 4 - 8.18.2008

Divided T4 housing flange with 3/8"-16 threaded mounting holes. You'll need to use studs as there's no clearance for bolts.

Shearer exhaust manifold 3 - 8.18.2008

Mon, 18 Aug 2008 08:56:16 +0900

Shearer exhaust manifold 3 - 8.18.2008

Wastegate priority sucks.

Shearer exhaust manifold 2 - 8.18.2008

Mon, 18 Aug 2008 08:56:16 +0900

Shearer exhaust manifold 2 - 8.18.2008

For 2G's you'll atleast need a pusher fan with the radiator inlet to the passenger side like the 1G. Any radiator thicker than 2" will need to be positioned further away as there's no space between the manifold.

Shearer exhaust manifold 1 - 8.18.2008

Mon, 18 Aug 2008 08:56:16 +0900

Shearer exhaust manifold 1 - 8.18.2008

Shearer Fabrication divided T4 exhaust manifold for the 1G 2G DSM.